Mechanical Specification
Sizes:
2″ (50mm)
4″ (100mm)
6″ (150mm)
8″ (200mm)
10″ (250mm)
12″ (300mm)
16″ (400mm)
20″ (500mm)
30″ (700mm)
Other custom sizes available upon request.
Drive Options
Double Acting Rotary Actuator
Bare Shaft
Seal Protection Ring (for “sticky” material)
Finishes
Standard Paint < 400° (204°C)
Mill Finish for stainless steel
(Ra < 125 micron)
Electro-polish for stainless steel
(Ra < 32 micron)
Super finish for stainless steel
(Ra < 8 micron) High Temperature Paint > 400°F (204°C)
Construction Materials:
Cast Iron ASTM A278
Stainless Steel Grade 304
Stainless Steel Grade 316
Design Temperature
212°F (100°C)
400°F (204°C)
536°F (280°C)
662°F (350°C)
Custom Options – Up to 1500°F (815°C)
Coatings
PTFE
Chrome
Carbide
Inflatable Seal Elastomers
Neoprene
Silicone
Viton
EPDM
FBA Rubber
(High seal temperatures up to 662°F/350°C are achievable with water cooling)
Pressure
100 psig / 7 barg, with custom options up to 630 psig / 43 barg
Flanges
ANSI 150 / PN 10 / PN 16
Controls
CON0 Controls not supplied
CON1 Pneumatic Solenoids only
CON2 Solenoids + Fail Safe
CON3 Position Confirmation, SM-95
CON4 Seal confirmation pressure switch
CON5 PLC w/enclosure
CONX Special configuration
4” Inline Dome Valve®
8” Stainless Steel Double Dump Valve with Position Indicators
8″ Teflon Coated Dome Valve®
24” Bulkhead Dome Valve® with Feed Chute
1” Stainless Steel Food/Pharmaceutical Quality Dome Valve®
8” Inline Dome Valve® with JIS Bolt Pattern
12” Stainless Steel Inline Dome Valve® with Controls and Customer Specific Actuator
12” High Temperature Dome Valve® with Seal Protection Ring
8″ Stainless Steel Dome Valve® with Food Quality Seal
8” Bulkhead Dome Valve®
4″ Inline Carbide Coated Dome Valve®
12” Inline Dome Valve®
16” Inline Dome Valve® with Dual Actuators and Customer Inlet Connection
2” Inline Dome Valve®
